I also would like to get an answer on this. I have a 6000xp and 4 RUIXU RX-LFP48100 batteries. I have the master battery with pin 6 in the up position and the Inverter Battery Type set to Lithium and Lithium Type set to 6. The Inverter will establish communication but will work for a while and then will lose comms and will cut power. then will come back on for a while and cut power. Is there a firmware update for the batteries to make comms more stable between batteries and the EG4 Inverter?
Now the inverter shows the correct amount of batteries in parallel 4, but is not sending the correct AH to the inverter. It's showing 200ah instead of 400ah.
I can’t seem to get the RUiXU server rack batteries to communicate with my EG4 6000xp. The monitor software doesn’t recognize the number of batteries or the battery capacity. I’ve found bits and pieces of information all over the internet but no place with a concise, instructions on how and what to set for everything to work properly
I also would like to get an answer on this. I have a 6000xp and 4 RUIXU RX-LFP48100 batteries. I have the master battery with pin 6 in the up position and the Inverter Battery Type set to Lithium and Lithium Type set to 6. The Inverter will establish communication but will work for a while and then will lose comms and will cut power. then will come back on for a while and cut power. Is there a firmware update for the batteries to make comms more stable between batteries and the EG4 Inverter?
I can’t seem to get the RUiXU server rack batteries to communicate with my EG4 6000xp. The monitor software doesn’t recognize the number of batteries or the battery capacity. I’ve found bits and pieces of information all over the internet but no place with a concise, instructions on how and what to set for everything to work properly
Yes
Be great to get an answer on this
I would like to know that also!